Fusin Motorsports Co., Ltd.

...A Green Solution for Transport

  • Increase font size
  • Default font size
  • Decrease font size

36V/10AH Li-ion pack

Description


Lithium Iron Phosphate (LiFePo4) - The ultimate in electric bike battery technology and the most economical e-bike battery option.

The lithium iron phosphate (LiFePo4) battery (also designated "LFP") is a type of rechargeable battery, specifically a lithium ion battery, which uses LiFePO4 as a cathode material.

The Fusinmotors LiFePo4 battery pack is the safest, most efficient and longest-lasting clean-energy option for powering electric bicycles.The 36V10AH Fusinmotors LiFePO4 battery pack is designed to be the ultimate compliment to the 36V E-bike conversion kit. Together the Fusinmotors LiFePO4 battery and brushless geared hub motor system form the cleanest and most effective high quality electric bike system in the world.

With this 10 amp hour pack you can expect to go from 12-30 miles on a single charge depending on the weight of the rider, the amount of pedaling and the route. With the included 2 amp charger a full recharge will take 4.5 hours.

Specifications:
* Dimensions: 356 x 148 x 69 MM
* Weight: 5.5KGS
* Cycle Life: 1500+
* Memory Effect: Zero - demonstrates excellent shelf life and is maintenance free
* Charge Time: 5 hours (from 0 - 100%)
* Safety: Extremely Safe
* Environmentally: Best of any EV battery technology

BMS:

  • Over-Charge Protection: 4.20V per cell - 50.4v ( 12 cells )
  • Over-Discharge Protection : 2.0V per cell - 24.0v ( 12 cells )
  • Max Discharge Current: 25A
  • Max Charge Current: 5A
  • Short Circuit Protection: Yes
  • Balancing: Yes

Highlights:

  • Latest LiFePo4 (Lithium Iron Phosphate)
  • "Safe Chemistry" technology
  • Advanced compact built-in BMS(battery management system)
  • Over Discharge Protection: To prevent damage to your battery, the BMS will monitor every cell in the battery pack (made of 8 cells). Over Charge, Over Discharge, Short Circuit Protection
  • Lightweight impact resistant aluminum battery enclosure
  • Replaceable 30 amp fuse
  • 2 Amp TRUE CE/UL approved charger
  • On Off Key Switch: Locks battery box to provided Rack System
  • Locking design
  • Convenient carry handle

 

Proper Care, Usage Instructions & Recommendations:

  • Charge completely before 1st use.
  • Charger Light Indicator: RED when charging / GREEN when fully charged
  • Store in cool dry place
  • When storing the battery for extended periods of time (1 month or more ) fully charge and then disconnect the charger
  • Always assist motor by pedaling when climbing hills to increase battery life
  • Always store battery indoors at night. Never leave your battery outside overnight.
  • Disconnect the battery wire from the Controller when not in use
  • Do not intentionally short battery leads
  • Use only supplied charger
  • Leaving the charger plugged into the battery for extended periods of time is ok
  • No "Memory Effect ", this battery can be recharged at any time, in fact, it is always better to charge fully before each ride.
  • Secure the battery to the bicycle and lock into place with Key Lock
  • In very cold climate ( 0 Celsius ) , the battery will have less capacity
 

Search in Site